Migiwata 2-in-1 Metric Straight Shank Countersink Drill Bits with HSS Drill Bits and Steel 45 Chamfers Set of 8pcs for Screw Countersinking in Woodworking Project - DiZiWoods Store

In lots of instances of woodworking tasks, it is vital for look, security and on a regular basis use that the screw heads be completely degree with, and even under, the floor of the lumber.
The answer for these sorts of tasks is to countersink your screws.

Within the previous means of countersinking, you"ll want to choose a drill bit that"s the similar diameter because the shafts of your screws, and a second drill bit that"s the similar diameter because the heads of your screws.
It is also tough to regulate the depth of the holes.

With this Migiwata 2-in-1 countersink drill bits set, the job shall be fairly straightforward. One bit can end drilling and countersinking for wood screws.
Drilling depth may be adjusted for numerous screws just by loosening and tightening the setscrew with an Allen wrench.

Good to have and good to make use of.

Specification:
Drill Bit Materials: Excessive Velocity Steel
Black Chamfer Drill Physique Materials: Steel 45
Diameter of Chamfer: 15.8mm and 18.8mm
Shank: Straight Shank
Size: 60mm, 75mm, 85mm, 93mm, 100mm, 110mm, 120mm

What you will get:
2-in-1 Countersink Drill Bit with a 3mm Bit and a 15.8mm Chamfer x 1pc
2-in-1 Countersink Drill Bit with a 4mm Bit and a 15.8mm Chamfer x 1pc
2-in-1 Countersink Drill Bit with a 5mm Bit and a 15.8mm Chamfer x 1pc
2-in-1 Countersink Drill Bit with a 6mm Bit and a 15.8mm Chamfer x 1pc
2-in-1 Countersink Drill Bit with a 7mm Bit and a 15.8mm Chamfer x 1pc
2-in-1 Countersink Drill Bit with a 8mm Bit and a 15.8mm Chamfer x 1pc
2-in-1 Countersink Drill Bit with a 10mm Bit and a 18.8mm Chamfer x 1pc
Allen Wrench x 1pcHigh high quality HSS 4241 drill bits and NO. 45 metal chamfer drill physique for sturdiness
The set consists of 7 items of woodworking countersink drill bits: 3mm, 4mm, 5mm, 6mm,7mm,8mm,10mm, with numbers on the drill bits for straightforward recognition. Specifically designed for sleeve countersinks or bores pilot holes.
5-flute chamfer can discharge the wood extra shortly in the method of drilling, with clean counterbore drilled at a time to save lots of you time and labor. The floor of the workpiece shall be completely embedded with screw cap.
By loosening and tightening the setscrew with a wrench(included), the counter sleeve depth and drilling depth may be simply adjusted for screws of numerous lengths.
Suitable with drilling machines with chuck, for drilling on hard wood or picket flooring. It is strongly recommended to make use of the middle punch for place earlier than drilling, maintain the drill bit vertical to keep away from the drill bit from bending or breaking.