Lot of four: 18" Inch BAR CLAMPS Heavy Duty Woodworking Wood Carpenter Tools - DiZiWoods Store







BRAND NEW - 18" Inch BAR CLAMP 2.5" Throat Depth Heavy Duty Wood Deal with Woodworking Carpenter Tools

- four Clamps Complete
- 18� Clamping Capability
- 2.5� Throat Depth
- Forged Iron, Powder Coated, Sliding Jaws
- Hardwood Deal with
- 2-piece Clutch Plates for Straightforward Positioning

Complete Qty four clamps
Modify from zero" to 18"
Plastic protectors on the ends for shielding the wood when clamping
Good for all of you clamping wants









Komentar

Posting Komentar

Postingan populer dari blog ini

Make a riving brake for better leverage when splitting lumber

Gambar
Sophisticated. The tripod riving brake shown here is the sophisticated version of a contraption to help hold logs and billets as they’re split with a froe. Get some splitting leverage with this simple contraption. by Peter Follansbee R each for a froe, and you should immediately think, “Give me a brake.” The brake can be a constructed workholding device, or just a couple of logs. Its function is to trap your workpiece in such a way that you can exert leverage on a section of a log as it’s splitting. The froe – used to split a piece when it’s in a brake – is a tool that requires some nuance to really get the most from it; the brake helps make that happen. There are many kinds and configurations of brakes. The first one I learned is just a forked section of a tree, propped up with crossed timbers underneath. Forked. Here, a student is using a forked-tree brake as he rives oak with a froe. Jam your billet into the fork with its other e...
Baca selengkapnya

Welsh Stick Chair Shoot: A Diffferent Video Approach

Gambar
I can finally put a tick next to something that’s long been on my “to do” list: Learn how to build a Welsh stick chair. With all that’s going on with my house right now (I just started tear-out on one of the bathrooms and still haven’t finished the stairs), I knew it would be years before I would get around to a chair build on my own time. So, I invited Kentucky bodger Don Weber to come teach me and a few friends on camera, which meant I could do it on company time. But as with all plans, the gods laughed. After Don said yes, and my friends – Christopher Schwarz, John Hoffman, Narayan Nayar and Justin Lieb – picked the week that would work for their schedules, I got called into two days of unavoidable meetings during said week. Ah well. So while I did in fact get hands-on, step-by-step instruction in building a Welsh stick chair, I have not (yet) actually finished building one. My seat is saddled, the legs are fit and I’ve dril...
Baca selengkapnya

Tongue and Groove Joinery - Popular Woodworking Magazine

Gambar
There are many ways to cut this popular edge-to-edge joint. by Bill Hylton from the April 2005 issue When setting up the table saw to cut the joint, just eyeball the rip-fence position for the groove. Sight down across the end of the stock and align a centerline drawn on it with the center of the cutter. A two-pass work routine centers the groove and eliminates the need for test cuts. When making the joint (right), a snug press fit is your goal. This is a first try – honest! A tongue-and-groove joint is an edge joint with a mechanical interlock. The edge of one board has a groove. A matching tongue is formed on the edge of the mating board. The tongue goes into the groove, and the boards are joined. You probably are most familiar with the joint’s many applications in building construction, such as strip flooring and paneling. In furnituremaking, the tongue and groove is excellent for edge-to-edge glue-ups. If cut precisely, the joint ensures that the faces of adj...
Baca selengkapnya