Amp-size DIY Wooden Box Enclosure Kit - 6" x 7" x three.25" - Easy to Assemble! - DiZiWoods Store

This DIY field package is straightforward to assemble, and completely sized for do-it-yourself amplifiers, results bins and different electronics tasks requiring a sturdy enclosure. They will additionally used for craft functions, and even for building do-it-yourself ukuleles!

This can be a easy package for simply developing a plywood field sized 6.one hundred twenty five" x 7.375" x three.25".We designed this field package with a "tab in slot" fashion that nearly eliminates issues from warping and ensures each field goes collectively good and sq.. The highest and backside are 1/eight" Arctic Birch ply, and the edges are 1/four" pure birch ply. These packing containers go collectively simply with only a little bit of wood glue... you do not even want clamps or different instruments (a heavy ebook or two will do)! This package consists of the 6 items (prime, backside and four sides) and a 2-web page meeting information with photographs.

This package is Made within the USA from a mixture of U. S.-made and Canadian-made plywood, hand-chosen for high quality.

Please notice: this can be a laser-cut product. One aspect of the cut panels could have some darkening/staining left over from the chopping course of. These spots may be sanded off if desired, or just stored on the within of the field, so they don"t seem to be seen. Some sanding is advisable to clean over edges. Glue just isn"t provided with this package, neither is sandpaper. This type of field just isn"t designed to be hinged/openable, due to the tab-in-slot construction. The highest is meant to be glued in place throughout construction of a musical instrument or different venture. Screwing the elements collectively shouldn"t be needed, and no pre-cut/drilled holes are included within the items. The items might have some slight warp to them, however as soon as the field is assembled and glued collectively, the tab-in-slot construction type ought to be sure that there isn"t a vital warpage to any key elements. Some further inside bracing could also be essential to make the most of this field because the physique of a stringed instrument.Easy-to assemble plywood field package - tab-in-slot fashion requires no clamping!
Nice for cigar field amplifiersand different instrument & craft tasks
Solely takes 15-20 minutes to assemble (plus glue drying time)
Kit is manufactured within the USA with plywood from US and Canadian sources
All you want to put it collectively is a few good glue and a few giant books to use as weights